Sea Dragon 5000+ with Color Boost Photo-Video Light
- Boat Trailers
- Canoes
- Electric Kayak
- Flyboard
- Foil Board
- Inflatable Boats
- Jetski
- Kayak
- Kiteboarding
- Mask Fin & Snorkel Packages
- Outboard Motors
- Paddle Boarding
- Paddle Sports
- Parts
- Photography
- Regulator Packages
- Scuba Accessory Packages
- Scuba Packages
- Spearfishing
- Tank Accessories
- Tanks
- Trolling Motor
- Water Trampoline
- Wing Surf
Your shopping cart is empty!
Product Description
Sea Dragon 5000+ with Color Boost Photo-Video Light
Features
Powerful 5000+ lumen wide beam COB LED (BridgeLux V18 COB LED) array optimized for color reproduction
90 Color Rendering Index (CRI) that mimics natural daylight
One button control for easy operation. One button to power light on/off and select brightness
5 Light Brightness Modes:5000 → 5000 Color Boost → 3000 → 1500 → Red LEDs → 5000 lumens [repeat]
Advanced Light Mode with 8 brightness Settings: 5000 → 5000 Color Boost → 6000 → 6000 Color Boost → 3000 → 3000 Color Boost → 1500 → Red LEDs → 5000 lumens [repeat]
60-minute run time at full power
Constant brightness – Regulated circuitry so light won’t dim with battery power
Easy to expand with Flex-Connect™ trays, grip and flex arms
120° wide beam evenly illuminates the subject with no hot spots (90° underwater)
Emergency mode emits blinking light or SOS signal to alert others of distress. Activated by holding down power button for 5 seconds from power off state
Depth rated to 330 ft (100m)
Corrosion-proof aluminum metal light head for heat dispersion and durability
Removable 50Wh 3400 mAh Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment protects internal electronics even if light accidently floods
Specifications
| Body Material | Hard-anodized T6061 aluminum light head and fiber-reinforced polycarbonate body |
| Light Source/Bulb Type | 1 x Bridgelux Gen 8 V18 COB LED array 2x Luminus SST10-R red LEDs |
| Brightness | 5000 continuous lumens with 2-minute 6000 lumen boost. Red light: 220 lumens |
| Brightness Control/Light Modes | Easy Mode: 5000 lumens → 5000 lumens + Color Boost → 3000 lumens → 1500 lumens → Stealth mode (red only) → repeat cycle; Advanced mode: 5000 lumens →5000 lumens + Color Boost → 6000 lumens → 6000 lumens +Color Boost → 3000 lumens → 3000 lumens + Color Boost → 1500 lumens → Stealth mode (red only) |
| Color Temperature | 5000K @ white light (without Color Boost); 3700K @ 5000 lumens Color Boost; 4000K @6000 lumens Color Boost; 2700K @ 3000 lumens Color Boost |
| Color Rendering Index* | 90 for COB wide beam LED |
| Beam Angle | White Light: 120° on land / 90° underwater Red light: 88° on land / 66° underwater |
| Battery | Li-ion 14.8V, 3400 mAh, 50Wh (included) |
| Battery Charge Time | 2 hours 15 minutes |
| Run Time | 3.3 hours at 1500 lumens; 1.7 hours at 3000 lumens and 60 minutes at 5000 lumens with Color Boost. Using 6000 lumen max brightness for 2-minutes reduces run time. SOS and Blinking run time is 40+ hours with fully charged battery |
| Depth | Tested to 330 feet/100 meters |
| Dimensions | 5.0” x 3.2” x 2.5” (128mm x 82mm x 64mm) (head only) |
| Weight | 19.7 ounces (557 grams) head with battery on land |
| Bulb Life | 35,000 hours |
| O-ring | Dual silicone O-rings (lube included) |
| Buoyancy | Negative; -111 grams underwater (Light Head only) |
| Country of Origin | Designed/Engineered in USA, Made in China |
*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time. The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.